VORTEX STRIKE EAGLE 3-18×44 FFP EBR-7C MOA
Specifications for Vortex Strike Eagle 3-18x44mm Riflescopes, 34mm Tube, First Focal Plane, EBR-7C MOA, Black, SE-31801
Using the Riflescope
|
|
|
---|---|---|
Reticle FocusThe Strike Eagle scope uses a fast focus eyepiece designed to quickly and easily adjust the focus on the riflescope’s reticle. 1. Look through the riflescope at a blank white wall, or up at the sky. 2. Turn the eyepiece fully outward (counterclockwise). 3. Slowly turn the eyepiece focus knob inward until the reticle image is as crisp as possible. |
Parallax AdjustmentThis adjustment dial is marked with approximate yardages to aid in initial setting and should be matched to the target’s distance. Final focus setting should be checked by moving your head back and forth slightly while looking through the scope and watching for any shift of the reticle on the target (parallax). If shift is observed, the dial should be adjusted slightly until shift is removed. |
Turret AdjustmentsTo make turret adjustments: 1. Pull the Locking Turret dial up/out to disengage the lock. 2. Up/down for elevation adjustments; left/right for windage adjustments. 3. Push the Locking Turret dial down/in to return to the locked position. |
Indexing the Elevation Turret
|
|
|
|
---|---|---|---|
1. Remove the turret cap and gently pull the turret dial off the turret post, being careful not to rotate the post. |
2. Place the zero stop ring over turret post. Push the ring down then rotate the ring clockwise until it stops. |
3. Reinstall the turret dial, lining up the “0” mark with indexing line on the scope body. |
4. Replace and tighten the Elevation Turret cap. |
Reviews
There are no reviews yet.